SPRAYMIST.ART is a sprayer line for low volume treatment in row farming, with an efficient and rational defence technique, associated with the need to safeguard the environment and the operator's safety. The main feature in the possibility of low volume spraying, where the high speed air flow, crossing the venturi sprayers, creates tiny, uniform drops. The same flow deposits the drops on the plants, guaranteeing optimal coverage.

Low volume spraying has numerous advantages:

- LESS DISPERSION. The various spray heads available to suit the various types of planting system enable distribution to be targeted on the plants, considerably limiting dispersion due to air drift. The minute droplets adhere totally to the surface of the plants, thus eliminating dripping.

- BETTER DISTRIBUTION. The droplets suspended in the air flow reach all parts of the plant, even the most concealed, ensuring uniform distribution of the liquid sprayed and total cover of the vegetation.

- PRODUCT SAVINGS. As there are no drips and minimum air-drift dispersion, all the product is distributed on the crops. The quantities indicated on the product packs can therefore be reduced by 10-20%. This therefore saves the quantity of product which would normally be lost on the ground and in the air with normal spraying.

- SAVINGS IN TIME AND COSTS. With the same amount of liquid in the tank, you can treat a surface from two to five times greater than with normal volume spraying. This longer working time enables the tank to be filled less often, reducing dead time for filling and preparing the water/product mixture.
This considerably reduces the time taken, saving fuel and labour costs. Spraying is therefore more rapid, sometimes indispensable for successful treatment.

- LESS WEAR. As they operate at low pressure, the pump and hydraulic circuit are less liable to wear than in a sprayer with high pressure pump. The performance of the sprayer therefore remains unaltered over the years.

- FLEXIBILITY. The vast range of heads available make SPRAYMIST sprayers extremely flexible and suitable for applying targeted treatments on specialised crops using any type of planting system. 


- Articulated low volume sprayer with spraying head mounted at the three points of the tractor and with a trailed tank unit

- Polyethylene tank

- Hot galvanised frame

- Adjustable wheel track

- Fan unit with centrifugal rotor

- Gearbox with one speed and disengaging

- Low pressure centrifugal pump

- Two hand spraying head

- Remote manual control unit for distribution placed on the tractor

- Hydraulic agitation of liquid in the tank

- External suction filter with non-return valve

- Hand washing tank

- Circuit washing device

- Product premixer in intake filter

- External graduated level gauge

- Side valve to empty tank

All SPRAYMIST sprayers comply with EC standards on operator safety and health protection. They also comply with European standards on environmental safety and protection.

available with polyethylene tank with a nominal capacity of 600, 800, 1000 and 1500 litres.

Actual capacity higher than nominal capacity in compliance with current regulations;
Quantity of residual liquid with tank flat or sloping by ± 10% below the limit allowed by current regulations;
Built-in clean water tank for hand-washing.
Built-in hydraulic circuit washing tank.

low pressure centrifugal with 130 litres/minute delivery (diaphragm pump optional on request).

centrifugal fan, 500 mm dia., 600/700 m³/hour air delivery. Absorbed power 40 KW.

SPRAY REGULATION: by means of 12-position measuring taps with built-in anti-drip device.


Length, cm370370420
Height, cm158158158
Width, cm140140140

Specifications may be altered without notice
*weights vary depending staging


Head with foue lower fans and four upper cannons
Two hand and four upper cannon head
Four hand head France type. With manual arm opening and closing.
Two hand and two cannon head France type.With manual arm opening and closing.
Two hand head and side cannon
Two hand head and side cannon
Four hand and four cannon head. It is compulsory to mount the double suction rotor.
Two hand and two cannon head
Four hand head (two top and two down)
Two hand and four cannon head

Di Serie

Gearbox with oli-bath gears.
Spraying circuit washing device.
Clean water tank for hand-washing.
Pressure regulator valve.
Equipment of hand-washing and spraying circuit washing device.
Outside scaled glass level guage.
Full emptying of the tank with valve.
Spraying head.
Frame articulation (for articulated version).
Centrifugal turbine fan.
Front view of the articulated version.


Double suction centrifugal rotor
Diaphragm pump IDS 1201 / BHS 130
Diaphragm pump APS 121 / AR 1203
Manual hydraulic distributor and hoses kit to move the arms (it is necessary if the tractor is not equipped with a distributor and an electro-hydraulic distributor
Electric.hydraulic distributor for arm movements
Two-way computer for distribution with electrovalves
Electrostatic system for distribution on two diffusers
Axle equipment with leaf springs.
Axle with brakes for 600 to 1500 litres low volume sprayers
Pair of mudguards
Signal light systems. Type-approved for the road circulation (only for Italy).
Drowbar with fork fitting
Articulated drawbar.
Articulated drawbar with tractor arms coupling
Tank level gauge with dial
Centrifugal pump with hydraulic motor and hose for tank filling
Filòling hose with "T"-shaped filter and connection with the intake filter
Cardan joint 50 hp with guard
Constant-velociy (wide-angle) cardan joint 60 hp with guard
Super premixer with transfer into the tank.
Rotating nozzle with tank washing jet.
Surcharge for tank in polyethylene "FOGLIA" model 1000, 1500 and 2000 litres sprayers prepared for application of an external premixer
Surcharge for pull out external premixer to prepare the product and place it in the main tank.

Request info - contact us

045 61 49 033


Subscribe to newsletter

Sign up to receive special offers and promotions from the world of Mantovani Giuseppe & Antonio S.R.L. - Florida Atomizzatori